Dodge 727, 518, 618, 48RE Transmission Pan

BPT-9393

Regular price $245.00 Save $-245.00
0 in stock
Dodge 727, 518, 618, 48RE Transmission Pan
Dodge 727, 518, 618, 48RE Transmission Pan
Dodge 727, 518, 618, 48RE Transmission Pan
Dodge 727, 518, 618, 48RE Transmission Pan
This transmission pan fits:
  • 1989 to 2007 Dodge Ram 1500, 2500, and 3500 trucks with 5.9 Cummins diesel or V10 engines
  • Some Dodge trucks with V8 gas engines from the late 1960’s until 2001
  • 2WD Durango with 5.9 V8
  • 2WD Dakota with 5.9 V8
  • Some V8 powered Ram vans
This transmission pan works with these Dodge TorqueFlite transmissions:
  • 518, A518 (46RH, 46RE)
  • 618, A618 (47RH, 47RE)
  • 727, A727 (36RH, 37RH)
  • 48RE
PML designed this pan to work with a variety of vehicles with these Dodge TorqueFlite transmissions. PML added capacity and fins for cooling. This pan is only one inch deeper than the stock pan to maintain clearance on most vehicles. Dimensions are provide in above link and you should always check your vehicle for clearance before ordering a larger transmission pan. Four wheel drive Durango & Dakota will likely have exhaust and frame clearance problems with a deeper pan. Filter and Gasket Information PML designed this pan to work with the stock filter and gasket. A filter extension is not needed with a PML pan. This pan is one inch deeper than stock and there is plenty of mixing of fluid due to vehicle movement as well as the fluid being sucked into the filter and returned from the oil cooler to prevent a stagnant layer at the bottom. The filter and oil level are at the same location with the PML pan and the stock pan. Drain The drain is on the driver's side of the vehicle shown at right. A magnetic drain plug and all mounting bolts are included with the pan. 1/8" NPT hole for a temperature sending unit is standard on this pan. Number of Bolts: 14 Prop 65 Warning Label

You may also like