Dodge 68RFE, 545RFE, 45RFE Extra Deep Transmission Pan

BPT-11039

Regular price $275.00 Save $-275.00
0 in stock
Dodge 68RFE, 545RFE, 45RFE Extra Deep Transmission Pan
This extra deep PML oil pan for Dodge RFE transmissions is designed to replace the stock pan on these vehicles:
  • Ram 2500 & 3500, 2WD and 4WD, with 6.7 liter diesel engine, 2007½ to 2012 or 2013 (the 3500 HD Cab & Chassis has the Aisin transmission so this pan will not work)
  • Ram 1500 with Hemi engine, 2002 - 2005
  • Ram 1500 with 4.7 V8 engine, 2002 to 2011, check clearance on 2012 to 2014
  • 2WD Dakota with 4.7 V8 engine, 2000 - 2004
  • 2WD Durango with 4.7 V8 engine, 2000 - 2003
  • Jeep Grand Cherokee with 4.7 V8 engine, 1999 - 2004
2013 and newer trucks: Cooler lines run under the stock transmission pan on many models, starting in 2013. Several customers have installed PML's deep RFE pan with minor bending of the bracket holding the cooler lines. If you have a 2013 or newer truck, check carefully for clearance. This pan is similar to the Dodge 45RFE, 545RFE, 68RFE tranny pan but has more capacity, is slightly deeper and costs a little more (4 1/2 quarts compared to 3 1/8 quarts over stock for 2WD). Both pans fit the same applications with the same exceptions. This design has a slant to it (one side longer than the other) so that once on the truck, the bottom is parallel to the ground like the stock pan. Unlike most other transmissions, Dodge put an angle on the gasket surface. The filter attaches to the valve body (bolt on & spin on), and does not use the pan for support. Compared to the stock 4WD pan, this pan is 1 7/8 inches deeper at front and 1 1/2 inches deeper in back. Volume: 4.5 qts. over stock for 2wd, 4 qts. over stock for 4wd Transmission Pan Features:
  • Increased oil capacity for cooler temperatures
  • Sand-cast aluminum with raised fins
  • 3/16-inch thick wall construction to add strength to the transmission case
  • 3/8-inch thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal
  • 1/8" NPT hole for a temperature sending unit is standard on this pan.
  • Magnetic drain plug for easier, less messy maintenance
  • Mounting hardware provided
Gasket and filter not included (use stock parts) Prop 65 Warning Label

You may also like