Bellhousing Adapters

Bellhousing adapter plates for manual transmissions
4 products

Quick view
83-93 Ford T5 to Chevy bellhousing adapter plate

MT801

$329.00
Quick view
83-93 Ford T5 to Ford 3 & 4 speed bellhousing

2600028

$285.00
Quick view
1984-92 S10 T5 to Chevy 3 & 4 speed bellhousing

MT10-01

$295.00
Quick view
Oldsmobile & Cadillac Bellhousing to GM TKX, TKO, Muncie

BH10003

$445.00

83-93 Ford T5 to Chevy bellhousing adapter plate

MT801

$329.00 Save $-329.00

This BELLHOUSING ADAPTER PLATE allows you to bolt a 1983 thru 1993 Ford T5 Transmission onto a common Chevy V8 Bellhousing.

This kit comes with a NEW Chevy front bearing retainer and custom pilot bushing. The front bearing retainer allows you to use the stock Chevy Flywheel, pressure plate, starter, throw-out bearing, fork, etc.


Materials Included:

(1) Adapter plate - Chevy bellhousing to Ford T5
(2) HCS 3/8-16 x 1-1/2
(2) Flat Washer 3/8
(2) FHSCS 1/2-13 x 1-1/2
(4) SHCS 7/16-14 x 1
(1) GM Front Bearing Retainer (modified)
(1) Seal 
(1) Pilot Bushing (modified)

 

83-93 Ford T5 to Chevy bellhousing adapter plate

83-93 Ford T5 to Ford 3 & 4 speed bellhousing

2600028

$285.00 Save $-285.00

This BELLHOUSING ADAPTER PLATE allows you to bolt a 1983 thru 1993 Ford T5 Transmission onto most stock 1964-82 Ford 3 & 4-speed Bellhousings. Interpolation machining on both sides maintains the centerline. This is not just a spacer!

This kit allows to continue to use the stock Ford Flywheel, pressure plate, clutch plate, throw-out bearing, starter and pilot bushing.

Materials Included:

(1) Adapter plate - 1983-1993 Ford T-5 onto most Ford 3 and 4 speed bellhousings
(2) FHSCS 7/16-14 x 1-1/2
(2) HCS 3/8-16 x 1 3/4 
(2) LOCK WASHER 3/8
(2) HCS 7/16-14 x 1

 

83-93 Ford T5 to Ford 3 & 4 speed bellhousing

1984-92 S10 T5 to Chevy 3 & 4 speed bellhousing

MT10-01

$295.00 Save $-295.00

This BELLHOUSING ADAPTER PLATE allows you to bolt a 1984 thru 1992 S10 T5 5-speed Transmission onto most stock Chevy 3 & 4-speed Bellhousings without shortening the input shaft. Interpolation machining on both sides maintains the centerline. This is not just a spacer!

NOTE:  You continue to use the stock Chevy Flywheel, pressure plate, throw-out bearing, starter, and pilot bushing.
However, the clutch plate needs to be replaced with a 14-spline disc that matches the diameter of the original. The front bearing retainer still needs to be shortened by 1/2 inch.

 

Materials Included:

(1) Adapter plate - 1984-1992 Chevy S10 T5 to most Chevy 3 & 4-speed Bellhousings
(4) SHCS 1/2-13 x 2

1984-92 S10 T5 to Chevy 3 & 4 speed bellhousing

Oldsmobile & Cadillac Bellhousing to GM TKX, TKO, Muncie

BH10003

$445.00 Save $-445.00

This is a BRAND NEW cast-aluminum Bellhousing that fits Oldsmobile (1949 thru 1964) or Cadillac extended bellhousing engines (1949 thru 1954). 

Retains OEM Flywheel or use with aftermarket versions.

These bellhousings are NOT meant to exactly replace the stock bellhousings. They are made to accept a GM pivot ball and cast steel fork or swap to a hydraulic clutch kit. Transmission opening is machined to accept Tremec TKX, TKO, and Muncie 4 speeds.  We also have extended pilot bushings available for different length input shafts. 

This part is over 1/4 inch thick, making it the heaviest-duty bellhousing available for these engines. 


These Bellhousings are cast and machined right here in the U.S.A.!
Oldsmobile & Cadillac Bellhousing to GM TKX, TKO, Muncie